TUXEDOby Mon Amie
Accessories

Caring for patent shoes: cleaning, storing, preventing cracks

Keep patent shoes handsome: wipe with a soft cloth, store with shoe trees in their own bag, avoid heat and creasing, and treat light scratches properly.

Editor: Mon Amie · Published · about 4 min read

Black leather cap-toe shoes
In this article
  1. Wipe with a soft cloth
  2. Store in their own bag, with shoe trees
  3. Avoid heat and creasing
  4. Dealing with scratches
  5. Tips from the Mon Amie workroom

Patent shoes differ from ordinary leather in the mirror-bright coating on the surface. That coating is beautiful but thin, so the care is different: no wax polish, no heat, no hard creasing. Three habits matter most: wipe with a soft cloth after every wear, store with shoe trees in a bag of their own, and avoid hot places or long walks that crease the leather.

Wipe with a soft cloth

After each wearing, wipe the shoes at once with a soft cotton or dry microfibre cloth. Dust and fingerprints show badly on a glossy surface, and left overnight, gritty dust can scratch the finish when you wipe it later.

When the shoes are properly dirty:

  1. Wipe gently with a soft cloth that is only slightly damp, plain water, in one direction.
  2. Wipe again with a dry cloth to remove water marks.
  3. Leave the shoes in the shade to dry completely.

For most marks, that is enough. Avoid alcohol, acetone, household cleaners, wax polish and ordinary shoe cream; they cloud or dull the finish. If you want a product, choose one made for patent leather and test it on a small hidden spot first. For the difference between this leather and polished calf, see patent and polished calf.

Store in their own bag, with shoe trees

How you store them decides their life more than the cleaning does.

  • Shoe trees: put them in straight after wiping. They hold the shape of the toe, smooth the crease at the vamp and draw out a little moisture. Cedar is the familiar choice; plastic trees also work.
  • A separate bag: one cotton or flannel bag per pair. Avoid sealing them in plastic for long periods, because the patent coating can stick to plastic in warm, humid conditions.
  • Do not let the two shoes touch: patent can stick to, or leave a mark on, its neighbour when pressed together. Put a layer of cloth between them if they share a space.
  • Where: dry, airy, out of the sun. In a humid climate like Ho Chi Minh City's, add a sachet of silica gel to the box to stop damp from reaching the lining.

A pair worn only a few times a year sits in its box for a long time. Take them out now and then, wipe them dry and let them breathe for a few hours before putting them away again.

Black leather oxford shoes
Black leather oxford shoes

Avoid heat and creasing

Heat and flexing are the two main causes of cracking in patent.

  • Heat: do not leave the shoes in a car boot or a car parked in the sun, and do not dry them with a hairdryer or beside a heater. The coating softens when hot and turns tacky; as it cools it tightens and tends to craze.
  • Cold: at very low temperatures the coating becomes brittle, so let the shoes come up to room temperature before wearing.
  • Creases: patent does not stretch like ordinary leather, so the bend at the toe is prone to fine cracks. Use a shoehorn, tie the laces moderately, and do not walk long distances in them. If you must walk far, carry them and change at the venue.
  • New pairs: wear them around the house for short spells before the big day, so the leather learns your foot. More in new patent shoes.

Rotating helps too: let the shoes rest a few days between wearings so the coating has time to recover.

Dealing with scratches

Scratches show more on patent than on ordinary leather. Sort them first so you treat them correctly:

  • Light surface scuffs that show only a faint white mark: take a soft cloth with the tiniest dab of petroleum jelly or a conditioner made for patent, rub in small circles, then wipe off the excess with a clean dry cloth. Many light scuffs fade.
  • Black marks from rubbing against another shoe or a plastic edge: wipe with a damp cloth; if that fails, use a cloth with a trace of oil as above.
  • Cracks, flaking coating or exposed leather: this is damage to the coating, which cannot be repaired by polishing. Take the shoes to a cobbler to see whether they can be touched up, and do not paint ink or wax over it.

Use very little oil and try it in a hidden place first, because too much leaves a smear.

Plum Satin Peak Tuxedo
Plum Satin Peak Tuxedo — TUX-061

Tips from the Mon Amie workroom

The patent shoe is the last thing people look at, but it has to agree with the hem of the trousers. When you try the tuxedo, wear the very shoes you plan to wear so the tailor can set the length of the leg. You can book a fitting at Mon Amie, and check back on the essential accessory kit to make sure everything is ready.

Published 17/11/2026 · 14:30 · Editor: Mon Amie

By appointment

Try a tuxedo at Mon Amie

Bring a model code from this article. Our tailors measure you in person and walk you through cloth, lapel and fit.

357 Nguyen Trai St., An Dong Ward, Ho Chi Minh City
Open daily 8:30 a.m. – 9:30 p.m.

  • Nguyen Trai

    357 Nguyen Trai St., An Dong Ward, Ho Chi Minh City

    0888.111.118Map

  • Ho Van Hue

    114–116 Ho Van Hue St., Duc Nhuan Ward, Ho Chi Minh City

    0836.111.113Map

  • 3/2 Street

    80–82–84 3/2 St., Hoa Hung Ward, Ho Chi Minh City

    0901.811.116Map

  • Caravelle Saigon

    Caravelle Hotel, 19–23 Lam Son Square, Saigon Ward (District 1), Ho Chi Minh City

    0898.111.113Map

  • Nguyen Thi Thap

    13 Nguyen Thi Thap St., Tan Hung Ward, Ho Chi Minh City

    0333.111.113Map

CallZaloBook